Labelling machine MPPE-12 000A
- 03/31/2015
Description
-
Productivity, bph
12000
-
Capacity, kW
12
-
Compressed air consumption, L/min
120
-
Machine dimensions, mm
4660х1665х2014
-
Weight, kg
1200
-
Pneumatic power supply, MPa
0,45-0,6
-
Bottle’s diameter, mm
45–150
-
Label material, mcm
polipropilen 35–40
-
Label height, mm
50-150
-
Glue consumption
1 kg for 15 000 labels
- * The minimum distance from the bottle's bottom to the label's lower edge is 22 mm
Labelling machine MPPE- 12 000A
The machine is designed for applying of rolled polypropylene label to cylindrical PET or glass bottle with volume 0,5 – 2,0 L. Machines with productivity over 6 000 bph are supplied with hot-melt glue station produced by Valco Melton Ltd. (Spain). Glue station is the equipment for heating and feeding of the hot-melt adhesive to the zone of label applying and for package forming. The station is working with different types of hot-melt adhesives in a form of granules, pillows and blocks.
COMPONENTS
1. Electric box
2. Turnstile sprocket
3. Stream cutter
4. Guiding shoe
5. Running rail
6. Adjusting block
7. Transporter
8. Gluing device
9. Main drive
10. Vacuum drum
11. Label cutting device
12. Delivery and pressing rolls
13. Running rolls
14. Roll table
15. Vacuum pump
16. Console
17. Rotameter block
18. Vacuum tubing taps
19. Air preparing block
20. Gearbox
21. Mark sensor
22. Block sensor “No label-no glue”
23. Block sensor “Label on drum”
24. Elguider DR 2275
25. Measure roll
26. Tension controller
27. Table
28. Running rolls
29. Powdered brake
30. Label position stabilisation device
31. MELTON- glue preparing block
The cutter device divides the label strip into separate labels. They are hold on the cutting drum by vacuum and then brought to the carrying drum by the compressed air. The carrying drum drives each label through the gluing roll of the gluing device. Thermal glue is put on the label there. The label with glue moves on the vacuum drum towards the bottle that is delivered by the turnstile star.
In starting position, the stream cutter is closed.
When the stream cutter is open the turnstile star gets the bottle and drives it to the glue zone. The bottle meets the label that is placed on the vacuum drum.
The vacuum drum presses the bottle to the running guide and rolls it.
The bottle with the label is being transported to the machine output end.
GLUE PUTTING DEVICE
This device heats the glue up to the working temperature 130-160 С° and puts it on the label. The heated glue is lifted up with the screw transporter. The scraper forms the optimal glue layer on the glue roll. The chipper does not let a label to roll over the glue roll. Glue surplus gets to the glue collector and then back to the glue preparing block.
If there is no label on the vacuum drum the pneumatic cylinder gets the glue roll out.
