UMT-600A-07PET
- 03/31/2015
Description
-
Productivity, ppm
12
-
Capacity, kW
29
-
Electric power supply, V/Hz
380/50
-
Machine dimensions, mm
4200x1200x2200
-
Weight, kg
1000
-
Pneumatic power supply, MPa
0,5-0,7
-
Dimensions of the received packet, mm
350х240х350
UMT machines are designed for product packing, bundling and bundle packaging.
Products for packing: foods, empty jars, bottles, boxes, other products that do not need preliminary packaging (wood, tiles, metal parts). Different products pack together.
Product is packed in thermal shrinking polyethylene to avoid its pollution, damages, moisture penetration and packaging into wooden and cardboard packs.
UMT-600A-07PETmachine is used for a wide range of cylinder-shape tare packing if the bundle contains several articles.
COMPONENTS
The main components (subassemblies) of UMT-600-07PET are:
• Bundle forming device (former);
• Thermo tunnel
• Board of controls
All forming and packing devices of the UMT-600-07PET machine are operated by controller in accordance with its program.Input transporter carries product to the former and here the bundle is formed.
Then stopper and cutter make a bundle of proper dimensions. The bundle is driven to the store area. After that the pusher drives the ready-bundle to the electric knife. At the same time the bundle is being wrapped by film on the perimeter.
Because of the following bundle movement the ready-bundle gets on the transporter. . Simultaneously the new part of film is ready. Off-taking transporter drives the block to the thermo-tunnel.
On the thermo-tunnel transporter the wrapped block goes through the thermo chamber, and the film is shrinking there.
At the thermo chamber exit the ready bundle is cooled and stabilized. The ready bundle drives onto the roll table. The bundle counter on the board of controls counts the amount of ready bundles.
